Quench Air
Air
Cooled Heat Exchanger - WaterSaver
Design
 
An SBS QUENCH AIR®
WaterSaver is a "dry cooler" heat exchanger which uses ambient air instead of cooling tower water to cool liquids
that have been heated in industrial processes. A Quench Air Cooler
completely eliminates the use of evaporative or once-through cooling water, so it helps reduce your
costs while benefiting the
environment. Fluids most often cooled are water and ethylene/propylene glycol solutions.
The SBS
Quench Air
functions much like a car radiator. The liquids from heated processes
flow through the heat exchanger’s copper finned tubes. The Quench Air’s
electric, motor-driven propeller fans blow cooling air over the tubes,
and the heat from the liquid is exchanged into the
air. The WaterSaver is generally used where cooling water outlet temperatures can be over 10°F/5°C above ambient air temperatures (i.e. fluid inlet is 120°F, fluid outlet is 100°F, and ambient air is 90°F)
SBS also offers the WaterSaver with a pump, expansion tank, piping, and controls for a pre-piped, pre-plumbed solution for closed loop water cooling. This is SBS' WaterSaver System.
Features:
 5/8" copper tubes with U-tube ends and aluminum fins
Highly efficient copper tubes with aluminum plate fins dissipate heat from the fluid rapidly. Fluid must be clean, as the U-tubes prevent mechanical cleaning.
|
QUIET,
EFFICIENT PROPELLER FANSUsing
minimal horsepower, propeller fans deliver the optimal quantity of air
with quiet operation. The direct drive fans eliminate sheave and belt
maintenance. |
FIN
GUARDMounted
on top of the heat exchanger, the fin guard protects the delicate
finned tubes from weather or people damage. The fin guards are bright
zinc plated and sealed with
di-chromate. |
OPTIONAL NEMA
3R DISCONNECT SWITCHWired
using SEAL TITE conduit and fittings, the switch gives a positive
electrical power lockout. The weather tight disconnect switch helps
assure compliance with OSHA electrical lockout
standards. |
|
|
PRODUCTS
|
|
|
Quench Air - WaterSaver
